Skip to content

[package list]

X11

Pre-installed modules (and EasyConfigs)

To access module help and find out for which stacks and partitions the module is installed, use module spider X11/<version>.

EasyConfig:

Technical documentation

This is a bundle of X11 tools provided by EasyBuild.

EasyBuild

Own components in some version

Bundle for 21.06

  • The bundle is taken from the 20210802 one from the EasyBuilders repository. We did add some additional packages to save on dependencies for some other packages: xprop, ldrm and DBus.

Bundle for 21.08

  • Same software versions as for 21.06, we did not check them again.

  • However, some modules were added with a library that was needed for some contributed software, and some tools to quickly check if an X11 connection is functional such as xdpyinfo and x11perf. xauth was also added in case this would still be useful for some users.

Bundle for 21.12

  • Components taken from the 2021b bundle with own additions at the end.

Bundle for 22.06 and 22.08

  • Started from the 21.12 bundle, but updated the packages with those of the GCCcore/11.3.0 - 2022a bundle. Also updated the local additions.

Bundle for 22.12 and 23.03

  • Started from the 22.08 bundle, but updated the packages with those of the GCCcore/12.2.0 - 2022b bundle. Also updated the local additions.

  • Added xterm to the bundle.

Bundle for 23.09

  • Regular packages taken from 2023a

  • Updated the own additions

    • DBUS 1.15.8 failed to configure so stuck to the older version.

Archived EasyConfigs

The EasyConfigs below are additonal easyconfigs that are not directly available on the system for installation. Users are advised to use the newer ones and these archived ones are unsupported. They are still provided as a source of information should you need this, e.g., to understand the configuration that was used for earlier work on the system.