libb2
License information
Libb2 is distributed under the Creativew Commons Zero v1.0 Universal license, see the COPYING file in the source repository.
From LUMI/23.12 on, the COPYING file can also be found in
$EBROOTLIBB2/share/licenses/libb2
after loading the module.
Pre-installed modules (and EasyConfigs)
To access module help and find out for which stacks and partitions the module is
installed, use module spider libb2/<version>
.
EasyConfig:
-
libb2/0.98.1-cpeAMD-22.08 (EasyConfig: libb2-0.98.1-cpeAMD-22.08.eb)
-
libb2/0.98.1-cpeAMD-22.12 (EasyConfig: libb2-0.98.1-cpeAMD-22.12.eb)
-
libb2/0.98.1-cpeAMD-23.09 (EasyConfig: libb2-0.98.1-cpeAMD-23.09.eb)
-
libb2/0.98.1-cpeAMD-23.12 (EasyConfig: libb2-0.98.1-cpeAMD-23.12.eb)
-
libb2/0.98.1-cpeAMD-24.03 (EasyConfig: libb2-0.98.1-cpeAMD-24.03.eb)
-
libb2/0.98.1-cpeAOCC-22.08 (EasyConfig: libb2-0.98.1-cpeAOCC-22.08.eb)
-
libb2/0.98.1-cpeAOCC-22.12 (EasyConfig: libb2-0.98.1-cpeAOCC-22.12.eb)
-
libb2/0.98.1-cpeAOCC-23.09 (EasyConfig: libb2-0.98.1-cpeAOCC-23.09.eb)
-
libb2/0.98.1-cpeAOCC-23.12 (EasyConfig: libb2-0.98.1-cpeAOCC-23.12.eb)
-
libb2/0.98.1-cpeAOCC-24.03 (EasyConfig: libb2-0.98.1-cpeAOCC-24.03.eb)
-
libb2/0.98.1-cpeCray-22.08 (EasyConfig: libb2-0.98.1-cpeCray-22.08.eb)
-
libb2/0.98.1-cpeCray-22.12 (EasyConfig: libb2-0.98.1-cpeCray-22.12.eb)
-
libb2/0.98.1-cpeCray-23.03 (EasyConfig: libb2-0.98.1-cpeCray-23.03.eb)
-
libb2/0.98.1-cpeCray-23.09 (EasyConfig: libb2-0.98.1-cpeCray-23.09.eb)
-
libb2/0.98.1-cpeCray-23.12 (EasyConfig: libb2-0.98.1-cpeCray-23.12.eb)
-
libb2/0.98.1-cpeCray-24.03 (EasyConfig: libb2-0.98.1-cpeCray-24.03.eb)
-
libb2/0.98.1-cpeGNU-22.08 (EasyConfig: libb2-0.98.1-cpeGNU-22.08.eb)
-
libb2/0.98.1-cpeGNU-22.12 (EasyConfig: libb2-0.98.1-cpeGNU-22.12.eb)
-
libb2/0.98.1-cpeGNU-23.09 (EasyConfig: libb2-0.98.1-cpeGNU-23.09.eb)
-
libb2/0.98.1-cpeGNU-23.12 (EasyConfig: libb2-0.98.1-cpeGNU-23.12.eb)
-
libb2/0.98.1-cpeGNU-24.03 (EasyConfig: libb2-0.98.1-cpeGNU-24.03.eb)
Technical documentation
EasyBuild
-
There is no support in the EasyBuilders repository
-
There is no support in the CSCS repository
Version 0.98.1
-
The EasyConfig is an adaptation of an internal EasyConfig file from the University of Antwerpen. It is a straightforward configure - make - make install process.
-
For LUMI/23.12, added license information to the installation, and added the
--enable-native=no
to ensure proper cross-compiling.
Archived EasyConfigs
The EasyConfigs below are additonal easyconfigs that are not directly available on the system for installation. Users are advised to use the newer ones and these archived ones are unsupported. They are still provided as a source of information should you need this, e.g., to understand the configuration that was used for earlier work on the system.
-
Archived EasyConfigs from LUMI-SoftwareStack - previously centrally installed software
-
EasyConfig libb2-0.98.1-cpeAMD-21.06.eb, with module libb2/0.98.1-cpeAMD-21.06
-
EasyConfig libb2-0.98.1-cpeAOCC-21.12.eb, with module libb2/0.98.1-cpeAOCC-21.12
-
EasyConfig libb2-0.98.1-cpeAOCC-22.06.eb, with module libb2/0.98.1-cpeAOCC-22.06
-
EasyConfig libb2-0.98.1-cpeCray-21.06.eb, with module libb2/0.98.1-cpeCray-21.06
-
EasyConfig libb2-0.98.1-cpeCray-21.08.eb, with module libb2/0.98.1-cpeCray-21.08
-
EasyConfig libb2-0.98.1-cpeCray-21.12.eb, with module libb2/0.98.1-cpeCray-21.12
-
EasyConfig libb2-0.98.1-cpeCray-22.06.eb, with module libb2/0.98.1-cpeCray-22.06
-
EasyConfig libb2-0.98.1-cpeGNU-21.06.eb, with module libb2/0.98.1-cpeGNU-21.06
-
EasyConfig libb2-0.98.1-cpeGNU-21.08.eb, with module libb2/0.98.1-cpeGNU-21.08
-
EasyConfig libb2-0.98.1-cpeGNU-21.12.eb, with module libb2/0.98.1-cpeGNU-21.12
-
EasyConfig libb2-0.98.1-cpeGNU-22.06.eb, with module libb2/0.98.1-cpeGNU-22.06
-